Description

Our products are milled from solid bar stock with all workperformed in our U.S.A. factory by American workers. While most manufacturersbuild a thinner rail that requires taller rings, we use a thicker dimension onour rails and lower ring heights that allow more room for porting the undersideto eliminate shell ejection issues which provides a rigid platform for yourscope to perform at its maximum ability. We also control the depth of the screwwith a countersink and do not recommend Loctite to hold it in place. Each orderincludes T15 Torx head screws. Use 20 to 25 inch lbs. to install. Used in good condition.